Release button, it will begin to flash. This turns on the Audio and Video
Press and release white # 1 button for PC at lectern.
Push chrome switch on wall to the down position to lower screen.
Push white switch on wall to the down position to lower shades.
At lectern connect VGA cable to your laptop. Connect other end of VGA cable
to Extron® VGA input #2.
Log onto your laptop. (Note: you can use wired or wireless keyboard and
mouse in the room.)
Where VGA cable is connected to lectern press button so the #2 is lit green.
(If light does not change make sure computer's is sending a signal, for Dell's®
hold down FN key and press F8, this should give you a picture.)
To turn off projector, press and hold green power button for 4 seconds then
Push switch on wall to the up position to raise screen and shades.